VU120

The actuator BLE is specially designed to remotely control smoke control dampers. The BLE is intended for VU120 and VUW120 dampers. 1. Access for manual resetting 2. Plug (ST)

VARIANTS

• BLE24
  Servomotor BEN 24V
• BLE230
  Servomotor BEN 230V
• BLE24-ST
  Servomotor BE 24V with plug (ST)

UNLOCKING

• manual unlocking
  VUW120: turn the enclosed handle clockwise / VU120 – VU90-HOT: turn the enclosed handle anti-clockwise.
• remote unlocking
  power cables 1 and 2.

RESETTING

• manual resetting
  VUW120: turn the enclosed handle anti-clockwise / VU120 – VU90-HOT: turn the enclosed handle clockwise.
• motorised resetting
  power cables 1 and 3.

The unlocking mechanism MANF EVO unlatches the damper blade via remote control by sending an electric impulse (VD) or by interrruption (VM) of the magnets power supply. A begin- and end of range switch (FDCU) is standard available. The blade can be reset manually (MANF EVO) or by an electric motor ME (option and kit). 1. Unlocking button 2. Resetting handle 3. Cable entrance

VARIANTS

• MANF EVO
  Upgradeable remote controlled unlocking mechanism
  
  

OPTIONS – MAGNET

• VD24
  Natural magnet 24 V DC + FDCU
• VD48
  Natural magnet 48 V DC + FDCU
• VM24
  Electromagnet 24 V DC + FDCU
• VM48
  Electromagnet 48 V DC + FDCU
  
  

OPTIONS – MOTOR

• ME
  Resetting motor ME 24V/48V
  
  

OPTIONS – SWITCH

• FDCU
  Limit switch ‘open/closed’
• FDCB
  Auxiliary limit switch ‘open/closed’
  
  

UNLOCKING

• manual unlocking
  use the unlocking button (1).
• remote unlocking
  (option VD/VM MAN EVO FDCU) by sending an electrical impulse (VD) or by interrupting the power supply (VM) to the magnet’s entrance.
  
  

RESETTING

• manual resetting
  turn 90° counter-clockwise with a hex socket wrench 13 mm (2).
• motorised resetting
  (option ME MANF) switch off the power supply for at least 10 sec. Power the actuator for at least 30 sec. (respect the prescribed voltage and polarity). The resetting stops automatically if a torque > 20 Nm is detected

The servomotor is designed to control smoke control dampers from a distance. This solution is suitable in case of counter-pressure. Beginning and end of range switches included. Access for manual resetting Locking button

VARIANTS

• NF24
  Actuator NF 24V
• NF230
  Actuator NF 230V
  
  

UNLOCKING

• manual unlocking
  use the enclosed handle and turn 1/4 turn counter-clockwise; push the locking button to the left.
• automatic unlocking
  n/a
• remote unlocking
  by interrupting the power supply (for dampers with NF/SF-VD module: by sending an electrical impulse).
  
  

RESETTING

• manual resetting
  use the enclosed handle and turn counterclockwise. To block the motor, push the locking button to the right.
• motorised resetting
  switch off the power supply for at least 10 sec (3 sec for NF/SF-VD module). Supply the actuator (respect the prescribed voltage) for at least 180 sec. The resetting stops automatically when the end of range is reached (damper closed).

The servomotor is designed to control smoke control dampers from a distance. This solution is suitable in case of counter-pressure. Beginning and end of range switches included. Access for manual resetting Locking button

VARIANTS

• SF24
  Actuator SF 24V
• SF230
  Actuator SF 230V
  
  

UNLOCKING

• manual unlocking
  use the enclosed handle and turn 1/4 turn counter-clockwise; push the locking button to the left.
• automatic unlocking
  n/a
• remote unlocking
  by interrupting the power supply (for dampers with NF/SF-VD module: by sending an electrical impulse).
  
  

RESETTING

• manual resetting
  use the enclosed handle and turn counterclockwise. To block the motor, push the locking button to the right.
• motorised resetting
  switch off the power supply for at least 10 sec (3 sec for NF/SF-VD module). Supply the actuator (respect the prescribed voltage) for at least 180 sec. The resetting stops automatically when the end of range is reached (damper closed).