ZENiX 100
ZENiX-100 controller (master)
The ZENiX-100 controller (master) monitors and controls fire dampers, smoke control dampers and smoke shutters, as well as digital inputs and outputs. Each ZENiX-100 controller can handle up to 100 field devices. Several ZENiX-100 controllers can be connected into a single network. The ZENiX-100 can be used with a pre-programmed basic fire scenario, but also to program elaborate multiple scenarios (matrix). It can be used as a stand alone solution or integrated into a BMS system via a BACnet IP connection.
Benefits:
- Onboard preprogrammed basic scenario, activated by digital input
- Full (matrix) programming possible, including priorities, multiple alarm levels, conditional alarms…
- System check only requires power on the ZENiX-100 controller
- ZENiX-100 automatically identifies and addresses all field devices during the data point check
- Onboard ZENiX Webtool identifies precise location of possible wiring mistakes
- Onboard BACnet IP gateway for connection to BMS and other systems
- LEDs indicate status bus communication, alarms and errors
Features:
- 2 digital inputs, potential free
- 2 relay outputs, (NO/NC) – 125 V AC – 60W
- Nominal voltage: 230 V AC
- Power consumption: 24 W
- For wire sizing: 25 VA
- Integrated ethernet port, with RJ45 connector
- DIN rail mounting
- CE according to EN 50491-5-2
- CE according to 2004/108/EC and 2006/95/C
Download the technical brochure of the ZENiX 100
Dear,
Thank you for expressing interest in our products. We are delighted to provide you with the technical brochure of the ZENiX 100. We appreciate your enthusiasm and look forward to assisting you further on your journey.
To download the brochure, please click the button below:
We hope our product brochure provides you with comprehensive insights into the features and benefits of the ZENiX 100. If you have any questions or require additional information, please don’t hesitate to reach out to our friendly sales & support team.
Thank you again for choosing Rf-Technologies.
Best regards,
Tony Readdy
Technical Sales Expert UK
M. 07939 316006 | tony.readdy@rft.eu
