ZENiX 500
ZENiX-500 controller (master) for 500 field modules (1000 elements)
The ZENiX-500 controller (master) monitors and controls fire dampers, smoke control dampers and shutters, as well as digital inputs and outputs. Each ZENiX-500 controller manages up to 500 field modules, or 1000 elements. Multiple ZENiX controllers can be connected to one network. The ZENiX-500 controller can be used as a stand-alone solution or integrated into a BMS system via a BACnet IP connection.
Benefits:
- ZENiX-500 automatically identifies and addresses all field devices during the data point check
- System check only requires power on the ZENiX-500 controller
- Onboard ZENiX Webtool identifies precise location of possible wiring mistakes
- LEDs indicate status bus communication, alarms and errors
- Full (matrix) programming possible, including priorities, multiple alarm levels, conditional alarms…
- Onboard BACnet IP gateway for connection to BMS and other systems
Features:
- Nominal voltage: 230 V AC
- Power consumption: 40 W
- For wire sizing: 25 VA
- Integrated ethernet port, with RJ45 connector
- Integrated 250V AC 2A relay (NO/NC)
- DIN rail mounting
- IP20
- CE according to 2004/108/EC and 2006/95/C
Download the technical brochure of the ZENiX 500
Dear,
Thank you for expressing interest in our products. We are delighted to provide you with the technical brochure of the ZENIX 500. We appreciate your enthusiasm and look forward to assisting you further on your journey.
To download the brochure, please click the button below:
We hope our product brochure provides you with comprehensive insights into the features and benefits of the ZENIX 500. If you have any questions or require additional information, please don’t hesitate to reach out to our friendly sales & support team.
Thank you again for choosing Rf-Technologies.
Best regards,
Tony Readdy
Technical Sales Expert UK
M. 07939 316006 | tony.readdy@rft.eu
